Toolsky

Free Online Tools & Utilities for Every Task.

Torque Converter

A workshop manual printed in Germany says to tighten a cylinder head bolt to 95 newton-metres. Your torque wrench, bought in the United States, is marked in pound-feet. Guessing the conversion risks a snapped bolt or a leaking gasket, and neither is a good afternoon. The Torque Converter on ToolSky translates between torque units such as newton-metres and pound-feet instantly, so the number on your wrench always matches the number in the manual.

Torque in Plain Terms

Torque is twisting force: how hard something is being rotated around an axis. It combines the force you apply with the length of the lever you apply it through, which is why a longer wrench makes a stubborn nut easier to turn. A newton-metre is the torque from one newton of force acting at the end of a one-metre lever. A pound-foot is the same idea in imperial units: one pound of force on a one-foot lever. The physics is identical; only the ruler and the scale changed when the Atlantic got involved.

Torque figures appear wherever threaded fasteners matter: engine assembly, wheel nuts, bicycle components, industrial machinery and structural steel all publish torque specifications, and using the wrong value is not a rounding issue. Too little torque and the joint works loose; too much and the bolt stretches, the threads strip or the part cracks.

Units the Torque Converter Handles

  • Newton-metres (N·m), the SI unit used by most manufacturers outside the United States.
  • Pound-feet (lbf·ft), often written ft-lb, the workshop standard in American manuals.
  • Related units used on smaller or larger jobs, such as pound-inches for delicate fasteners and kilogram-force metres found in older specifications.

Torque sits in a family of mechanical quantities. If your specification sheet also lists rotational power or clamping-related pressures, the Power Converter and the Force Converter cover those unit families in the same way.

How to Use the Torque Converter

  1. Find the torque value and unit in your manual, specification sheet or parts documentation.
  2. Enter the value into the converter.
  3. Select the unit the value is expressed in, such as newton-metres.
  4. Select the unit your wrench or gauge displays, such as pound-feet.
  5. Read the converted value and round it sensibly for your tool's scale.
  6. Set the wrench to the converted figure and tighten the fastener to specification.

Worked Example: 120 N·m Wheel Nuts in Pound-Feet

Many passenger cars specify wheel nut torque around 120 N·m. One newton-metre equals about 0.7376 pound-feet, so 120 N·m multiplied by 0.7376 gives 88.5 pound-feet. If your click-type wrench is marked in pound-feet, you would set it to roughly 88 or 89 and tighten each nut in the star pattern the manual prescribes. Working the same conversion in reverse, an American spec of 100 pound-feet equals about 135.6 newton-metres, because one pound-foot is 1.3558 N·m. Keeping both directions straight matters: treating 100 pound-feet as if it were 100 newton-metres would leave the joint about a quarter looser than intended.

Where Torque Conversions Go Wrong

The classic blunder is confusing pound-feet with pound-inches. They differ by a factor of twelve, and small fasteners on electronics, bicycles and instruments are often specified in pound-inches or newton-centimetres precisely because the values are tiny. Applying a foot-pound figure to an inch-pound job will destroy the part. The second trap is linguistic: ft-lb and lb-ft are used interchangeably in casual writing for torque, even though ft-lb also names a unit of energy. In a torque context they mean the same twisting force, so convert the number and do not let the word order stall you.

Also remember what a converter cannot do. It translates units faithfully, but the correct specification still depends on bolt size, thread condition, lubrication and the manufacturer's instructions. A lubricated thread reaches the same clamping force at lower torque than a dry one, which is why manuals state whether their figures assume dry or oiled threads.

One more caution concerns generic torque charts. The internet is full of tables suggesting a standard torque for a given bolt diameter, and they are fine as a rough sanity check, but they cannot know the bolt's grade, the materials being clamped or whether the joint holds a gasket. Where a manufacturer's figure exists for your exact application, it outranks any chart, and where a fastener is safety-critical, wheels, brakes, steering, suspension, the manual's value and sequence are the only authority worth following.

Frequently Asked Questions About Torque Units

Is a newton-metre the same as a joule?

They share the same dimensions, but they measure different things. A joule is energy; a newton-metre of torque is rotational force. The shared units are a quirk of the maths, not a licence to treat them as interchangeable.

Which is larger, one newton-metre or one pound-foot?

One pound-foot is larger, equalling about 1.356 newton-metres. Conversely, one newton-metre is about 0.738 pound-feet.

Why do American manuals write ft-lb instead of lb-ft?

Both orders appear in print and mean the same unit in torque specifications. The variation is a publishing habit rather than a technical distinction.

How do I convert pound-inches to newton-metres?

Divide pound-inches by twelve to get pound-feet first, then convert, or use the direct relationship: one pound-inch is about 0.113 newton-metres. The converter handles the unit directly if you select it.

Does the length of my wrench change the torque setting?

No. A torque wrench measures the torque at its head regardless of handle length. Extensions that change the effective length, such as crowfoot attachments used at an angle, are the exception and do require an adjusted setting.

Why do torque specs sometimes give a range instead of one number?

A range allows for tool accuracy and friction variation in real joints. Aim for the middle of the range unless the manual instructs otherwise.

Can I use this converter for bicycle torque specs?

Yes. Bicycle components are usually specified in newton-metres at low values, sometimes as low as 4 or 5 N·m for stem and seatpost bolts, and converting accurately matters because carbon parts crack when over-tightened.

Tighten to the Spec, Not to a Guess

Every torque figure in a manual was chosen for a reason, and the only thing standing between it and your wrench is a unit conversion. Do the conversion properly, set the tool once, and the fastener ends up exactly as tight as its designer intended.