Toolsky

Free Online Tools & Utilities for Every Task.

Luminance Converter

A specialized tool to convert between luminance units like Candela per square metre (nits), Stilbs, and Lamberts.

Screen specifications, lighting papers and older engineering references all describe brightness per unit area — but rarely in the same unit. One document quotes candela per square metre, an American datasheet gives foot-lamberts, and a mid-century journal uses stilbs. A luminance converter translates between these units so the figures can be compared honestly, instead of being mistaken for different quantities of light.

Luminance, Explained Without the Jargon

Luminance measures how bright a surface appears to be — how much light it emits, transmits or reflects from a given area in a given direction. It is the quantity behind the everyday word "brightness" as your eyes experience it: double the luminance and a screen or a lit wall genuinely looks twice as intense, whatever the room lighting does. The SI unit is the candela per square metre (cd/m²), universally nicknamed the nit in the display industry, which is why phone and monitor specifications are quoted in nits.

Do not confuse luminance with illuminance. Illuminance is light arriving at a surface (measured in lux), while luminance is light leaving it toward your eye. A white page under a lamp has high illuminance; how bright the page then looks is its luminance, and it depends on the paper's reflectance as well. The two quantities convert within their own families only — this tool handles luminance; light arriving at a surface belongs to the illuminance converter.

The Units: Nits, Stilbs and Lamberts

  • Candela per square metre (cd/m², "nit") — the SI unit and the modern standard for displays, projectors and lighting design.
  • Stilb (sb) — the older CGS unit, equal to one candela per square centimetre, which makes it large: 1 stilb = 10,000 cd/m². It survives in older European literature and very bright sources.
  • Lambert (L) — a CGS unit named after Johann Heinrich Lambert, defined as 1/π stilb, giving 1 lambert ≈ 3,183 cd/m². Common in mid-20th-century papers on screens and photography.
  • Foot-lambert (fL) — the imperial counterpart, 1/π candela per square foot, equal to about 3.426 cd/m². Still the working unit of cinema projection in the United States.

How to Convert Luminance Values

  1. Identify the unit your source figure uses — check carefully, because "lambert" and "foot-lambert" differ by a factor of more than 900.
  2. Enter the luminance value into the converter.
  3. Select the unit you are converting from.
  4. Select the unit you need the answer in.
  5. Read the converted value and note its unit alongside it in your document, so nobody has to guess later.
  6. For figures that will be compared side by side, convert everything into one unit — cd/m² is the safest common denominator.

Luminance Numbers You Meet in Practice

Take a typical laptop screen measured at 300 cd/m². In the older units that is 300 ÷ 10,000 = 0.03 stilb; in lamberts, 300 ÷ 3,183 ≈ 0.094 lambert; and in the cinema world's foot-lamberts, 300 ÷ 3.426 ≈ 87.6 fL. That last figure explains a familiar experience: a commercial cinema screen is specified at about 14 fL (roughly 48 cd/m²), far dimmer than your laptop — which is why cinemas are dark rooms, and why a phone screen that seems modest indoors at 300 nits is painfully bright in a theatre.

The same conversions appear when reading display reviews that mix European and American sources, when following HDR specifications (where peak luminance may be quoted at 1,000 cd/m² or more), and when working through older photography and projection literature for restoration projects. A fuller technical background on the quantity itself is available in the Wikipedia article on luminance.

Luminance Pitfalls and How to Avoid Them

The most expensive mistake is the lambert/foot-lambert mix-up: treating 14 fL as 14 L inflates a cinema screen's brightness nearly a thousandfold on paper. Always write the unit in full at least once in any document you produce. Second, remember that a single luminance figure for a screen is usually its peak, measured on a full-white test image; real content, automatic brightness limiting and viewing angle all reduce what you actually see. Third, luminance says nothing about how much light a room needs — that is the illuminance question in lux, and confusing the two leads to lighting designs that are technically literate and practically wrong. Finally, when you meet luminance inside image-editing software, be aware that editors often use the word loosely for a pixel's brightness channel; it is related in spirit to the photometric quantity, but it is not measured in nits — that is a display value, and image work uses tools like the image adjustment tool instead.

Frequently Asked Questions About Luminance

What is a nit?

"Nit" is the industry nickname for one candela per square metre, from the Latin "nitere", to shine. Display specifications almost always use it: a typical office monitor is 250–350 nits, while HDR highlights may exceed 1,000 nits.

Is luminance the same thing as brightness?

Luminance is the measurable physical quantity behind the sensation of brightness. Brightness is what you perceive, and it also depends on adaptation and surroundings — the same 300-nit screen looks dim in sunlight and dazzling in a dark room.

Why do older papers use stilbs and lamberts?

They predate the SI system's adoption. The stilb and lambert come from the centimetre-gram-second system that European science used for much of the 20th century, so archives, textbooks and journals from that era quote them freely.

What is the difference between luminance and illuminance?

Illuminance (lux) is light falling onto a surface; luminance (cd/m²) is light leaving a surface toward the eye. One describes the cause, the other the visible result, and they cannot be converted into each other without knowing the surface's properties.

How bright is a cinema screen in nits?

The long-standing reference for cinema projection is about 14 foot-lamberts, which converts to roughly 48 cd/m² — much dimmer than consumer displays, which is why auditoriums are kept dark.

Which unit should I use in my own documents?

Candela per square metre (nits) is understood worldwide and is the SI unit. Use it as your default, and add a converted figure in lamberts or foot-lamberts only when your specific audience — for example US cinema engineers — works in those units.

Does a higher luminance figure always mean a better display?

No. Peak luminance is one figure among many; contrast, colour accuracy, uniformity and how the display sustains brightness across the whole screen matter as much. Very high peaks mainly help HDR highlights and bright-room visibility.

One Brightness, Whatever the Unit

Stilbs, lamberts and nits are three dialects for the same physical fact. Convert into a single unit before you compare, write the unit down with every figure, and specifications from any era or country become readable at a glance.