Toolsky

Free Online Tools & Utilities for Every Task.

Audio Volume Booster

Increase the volume of your audio or video files by up to 500% without losing quality.

Choose Audio/Video File

MP3, WAV, M4A, MP4 (Max 100MB)

Normal (100%) Max (500%)

You finish recording an interview, a voice note or a screen tutorial, press play, and can barely hear anything — even with your speakers turned all the way up. The recording itself is fine; it was simply captured at a low level. An audio volume booster fixes exactly that problem by raising the loudness of the finished file, and this one can increase the volume of audio and video files by up to 500%, so a whisper-quiet clip becomes clearly audible without re-recording it.

Why Recordings End Up Quieter Than You Expect

Low volume usually starts at the microphone. If the mic sits too far away, the input gain in your recording app is set low, or you speak softly to avoid distortion, the waveform is written to the file at a fraction of the maximum level. Phones make this worse: they often apply cautious automatic gain, and a phone lying on a desk records a much weaker signal than one held close. Video files have the same issue, because the audio track is recorded under the same conditions as the picture.

Once the file exists, turning up your playback volume only helps so far — it amplifies everything on your device, including system sounds, and it does nothing for the next person you send the file to. Boosting the file itself is the permanent fix, because the louder level is baked into the audio and travels with the clip wherever it goes.

What This Volume Booster Actually Does

The tool takes your audio or video file and multiplies the amplitude of its audio track by the percentage you choose. A setting of 200% doubles the amplitude, which corresponds to roughly a 6 dB increase; 400% adds about 12 dB, and the maximum 500% is close to a 14 dB lift. That is a large range — most genuinely quiet recordings need somewhere between 150% and 300%.

  • Works on audio and video: you can boost a standalone recording or lift the sound track of a video whose picture is fine but whose speech is buried.
  • Adjustable boost level: instead of a single fixed increase, you pick how much louder the file should get, up to five times the original amplitude.
  • One-purpose workflow: there is nothing to configure beyond the file and the boost level, which makes it suitable for people who have never opened an audio editor.
  • Preserves the rest of the file: the content, timing and (for video) the picture stay as they were; only the loudness changes.

If your clip also has dead air at the beginning or end, trimming it first with the Audio Trimmer keeps the boosted file tidy, and if the boosted result needs to live in a different format, the Audio Converter can convert it afterwards.

How to Make a File Louder

  1. Open the Audio Volume Booster and upload the audio or video file you want to make louder.
  2. Listen to a short section of the original, ideally the quietest part, so you have a reference point.
  3. Choose a boost level. Start conservatively — around 150–200% for mildly quiet files, more only if the recording is genuinely faint.
  4. Start the boost and wait for the file to be processed.
  5. Preview the result and listen carefully for distortion, especially on the loudest words or notes.
  6. If it is still too quiet and sounds clean, run it again with a higher setting; if it distorts, go back and use a lower one.
  7. Download the finished file and keep your original as a backup.

Working in stages like this matters. It is always safer to boost twice by a moderate amount, checking each time, than to jump straight to 500% and discover the loud passages have been damaged.

Everyday Situations Where a Boost Helps

Consider a practical case. You record a 20-minute interview for a podcast on your phone, and afterwards the guest's answers peak at a very low level because the phone sat closer to you than to them. Boosting that file by 250% multiplies the amplitude two and a half times — roughly an 8 dB lift — which typically moves faint speech into a range listeners can hear comfortably on earbuds without maxing out their volume. The same maths applies to a lecturer recorded from the back of a hall, a child's recital filmed from the audience, or narration recorded for a tutorial that came out softer than the background music you later added.

Other common uses include rescuing voicemail and call recordings you need to transcribe, lifting the dialogue in a family video shot on a windy day, matching the loudness of several clips before joining them (the Audio Merger can combine them once their levels are closer), and making a quiet ringtone or alarm tone actually noticeable.

Mistakes That Ruin Boosted Audio

The biggest mistake is assuming more is always better. Every recording has a ceiling: once the waveform is pushed to the maximum digital level, it clips, and clipped audio sounds harsh and crackly on peaks. Clipping cannot be undone, which is why checking the loudest moment matters more than checking the average.

A second mistake is expecting a boost to improve clarity. Boosting raises everything in the recording by the same amount — the voice, but also room hum, traffic noise, keyboard clicks and the hiss of a cheap microphone. A quiet-but-clean recording boosts beautifully; a quiet-and-noisy one just becomes louder noise around the voice. Third, avoid boosting an already loud file "just in case": if a file already peaks near the maximum, any boost will push it into distortion. Finally, do not boost, save, and then boost the saved copy repeatedly at high levels; work from the original each time so processing artefacts do not stack up.

Frequently Asked Questions About Boosting Audio Volume

Will boosting reduce the quality of my recording?

A moderate boost on a clean recording has little audible downside. Problems appear at extreme settings: the noise floor rises with the signal, and peaks that hit the ceiling clip. Stay only as high as the file actually needs.

How much should I boost a very quiet voice recording?

Start at 200% and preview. Speech recorded far from the microphone often needs 250–400%, but check the loudest syllables after each pass rather than guessing the final number in advance.

Can I boost the audio of a video without changing the picture?

Yes. The tool raises the level of the video's audio track; the visual content is not edited, so the clip looks identical and simply sounds louder.

What does 500% mean in decibels?

Percentages here describe amplitude. Doubling amplitude (200%) is about +6 dB, and 500% is roughly +14 dB. Because decibels are logarithmic, each doubling adds the same ~6 dB step.

Why does my boosted file sound distorted on loud parts?

Those peaks were pushed past the maximum level and clipped. Re-run the boost from the original file with a lower percentage; distortion introduced by clipping cannot be removed afterwards.

Will boosting remove background noise?

No — boosting makes the whole recording louder, noise included. It fixes level, not cleanliness. For a noisy recording, a smaller boost is usually the better compromise.

Can I boost a file more than once?

You can, but work from the original file for each attempt rather than re-boosting an already boosted copy, and preview after every pass to catch distortion early.

Louder, Within Reason

A volume booster is at its best as a rescue tool: one sensible pass that turns an unusable, whisper-quiet recording into something people can actually listen to. Pick the smallest increase that does the job, preview the loudest moments, and your quiet interviews, lectures and voice notes become shareable instead of frustrating.