Toolsky

Free Online Tools & Utilities for Every Task.

Memory / Storage Converter

Storage sizes look simple — kilobytes, megabytes, gigabytes, terabytes, each bigger than the last — until a 256 GB phone reports noticeably less space than 256 GB, or a file that is "4.7 GB" refuses to fit a "5 GB" allowance. The confusion is real, and it comes from two rival definitions of the same words. A memory and storage converter translates between data units — bytes and their multiples in both systems — so the number on the box and the number on your screen can finally be reconciled.

Two Systems: Decimal and Binary Storage Units

Computers count in binary, so the original storage units grew by 1,024 (2^10): 1,024 bytes to a kilobyte, 1,024 kilobytes to a megabyte, and so on. The metric world, meanwhile, uses powers of 1,000, and disk manufacturers adopted the decimal version — partly for consistency with every other metric measure, and partly, cynics note, because it makes the number on the box bigger. The gap compounds with size: at the kilobyte scale the two definitions differ by about 2.4%, at the terabyte scale by nearly 10%.

To end the ambiguity, the International Electrotechnical Commission introduced distinct binary names: kibibyte (KiB), mebibyte (MiB), gibibyte (GiB) and tebibyte (TiB), each exactly 1,024 of the previous. In practice, operating systems vary — some report binary quantities with decimal labels, others use the IEC names properly — which is why a converter that speaks both dialects is the only reliable referee. When you convert, know which definition your figure came from and which one you need.

Units From Bits to Terabytes

  • Bytes and bits — the byte (8 bits) is the working unit of file size; the bit survives mainly in network speeds, which is why downloads confuse everyone (see below).
  • Kilobytes (KB / KiB) — a short text file or a small icon; 1,000 bytes decimal, 1,024 bytes binary.
  • Megabytes (MB / MiB) — photos, songs and documents live here; the unit of everyday file sizes.
  • Gigabytes (GB / GiB) — phone storage, films, games and full backups; the scale where the decimal–binary gap becomes visible to the naked eye.
  • Terabytes (TB / TiB) — hard drives, NAS boxes and cloud plans; the gap here is roughly a tenth of the drive, large enough to feel like a missing chunk.

How to Convert Storage Sizes

  1. Note the size you have and, if you can, which definition it uses — a drive box is decimal, an operating system's report may be binary.
  2. Enter the number into the converter.
  3. Select the unit the figure is expressed in, choosing the decimal or binary variant deliberately.
  4. Select the unit you want the answer in.
  5. Read the converted value, and if you are comparing against a limit or a second device, convert that figure into the same system before judging.
  6. For buying decisions, compare like with like: a 1 TB drive and a "1,000 GB" cloud plan are the same decimal quantity, whatever the labels suggest.

Storage Conversions in Real Life

Work through the classic puzzle: a phone or SSD sold as 256 GB. The manufacturer means 256 × 1,000³ = 256,000,000,000 bytes. An operating system that counts in binary divides by 2^30 and reports 256,000,000,000 ÷ 1,073,741,824 ≈ 238.4 GiB. Nothing is missing — the same bytes wear two different numbers, and the "lost" 17-odd gigabytes are a unit conversion, not a defect (a small further slice does go to formatting and system files, but the headline gap is arithmetic).

The reverse direction helps when planning: a backup of 1.5 TB is 1,500,000 MB in decimal counting, but the very same bytes are 1,430,511 MiB when the destination counts in binary units — a gap of nearly 70,000 units between the two labels, which matters when you are checking whether the backup fits a volume that is nearly full. Shrinking the files themselves is the other half of storage peace; the image compressor and video compressor reduce what you need to store in the first place.

Why Your New Drive Looks Smaller Than the Box

You now know the main answer — decimal box, binary report — but two smaller effects stack on top. Filesystems reserve space for their own bookkeeping (journals, allocation tables, recovery partitions), and devices set aside storage for firmware and pre-installed software. None of this is recoverable by converting units, which is why the honest comparison is always: convert the advertised size into your operating system's units first, then subtract a little more for overhead.

The other everyday trap is bits versus bytes in speeds. Broadband and network figures are quoted in megabits per second (Mbps): a 100 Mbps connection downloads at most 100 ÷ 8 = 12.5 megabytes per second, so a 700 MB file takes at least about 56 seconds, not seven. Whenever a size and a speed meet in one calculation, convert the speed into bytes first — most "why is this so slow" mysteries dissolve at that step.

Frequently Asked Questions About Storage Units

Why does my 1 TB drive show only about 931 GB?

Because the drive's terabyte is decimal (10^12 bytes) while the computer is reporting gibibytes: 1,000,000,000,000 ÷ 2^30 ≈ 931.3 GiB. The capacity is all there; it is being counted in a larger unit.

Is a gigabyte 1,000 or 1,024 megabytes?

Both, depending on the system: 1,000 MB in the decimal (SI) definition used by manufacturers and standards bodies, 1,024 MiB in the binary definition used by much software. The IEC names — GB versus GiB — exist to tell them apart.

What is the difference between MB and Mb?

Case matters: MB is a megabyte (8 million-odd bits of data), Mb is a megabit. File sizes are measured in bytes; connection speeds are advertised in bits, which is why dividing the speed by 8 gives the real download rate in megabytes per second.

How many gigabytes are in a terabyte?

1,000 GB in decimal terms. In the binary system the matching pair is the tebibyte: 1 TiB equals 1,024 GiB. When converting a specific drive or plan, match the definition the source uses, or the answer will be off by roughly 7–10%.

Which definition does my phone or computer use?

It varies by system and version: some report decimal, some binary with decimal labels, some (notably Linux tools) offer both with correct IEC labels. The converter's two unit families let you reproduce whichever figure your device shows and translate it reliably.

Why do downloads take longer than the speed suggests?

Usually the bits-versus-bytes gap: divide the advertised Mbps by 8 to get megabytes per second, then allow for network overhead and server limits. The file size itself was never wrong — the comparison was.

Same Bytes, Honest Numbers

Storage maths is only confusing because two honest systems share one set of names. Decide which definition a figure uses, convert deliberately, and the missing gigabytes reappear — they were never gone, just counted differently.