Toolsky

Free Online Tools & Utilities for Every Task.

Power Converter

The same machine can be described three different ways depending on who built it and where it is sold: an electric motor rated in kilowatts, a car engine in horsepower, an air conditioner in BTU per hour. Power is power, but the units refuse to agree. This power converter translates between watts, kilowatts, horsepower, BTU per hour and other common units, so you can compare machines, check specifications and make sense of ratings written for a different market.

The Units You Will Meet

The watt (W) is the standard scientific unit of power — one joule of energy per second — and the unit appliances are labelled with almost everywhere. A kilowatt (kW) is simply 1,000 watts, the scale at which heaters, motors and electric cars are rated. Horsepower (hp) survives from the age of steam: one mechanical horsepower equals about 745.7 watts, and it remains the language of car engines, especially in the United States. BTU per hour is the heating and cooling world's unit: one watt equals about 3.412 BTU/h, and air conditioners and furnaces are sized by it across North America.

One warning hides inside horsepower: there are two of them. Mechanical (imperial) horsepower is 745.7 W, while metric horsepower — PS, seen on European and Japanese car specifications — is 735.5 W. The difference is only about 1.4%, but it is enough that a careful conversion should state which horsepower it means.

What This Converter Covers

  • Watts and kilowatts: the base units for appliances, electronics and electrical equipment.
  • Horsepower: for engines and motors rated the traditional way.
  • BTU per hour: for heaters, air conditioners and other thermal equipment.
  • Both directions instantly: enter a value in whichever unit you have and read every equivalent.
  • Decimals welcome: real specifications like 2.2 kW or 0.75 hp convert without rounding games.

Power's close relative — energy, measured over time — is handled by the energy converter, and the electrical side of motor questions connects with the Ohm's law calculator.

How to Convert Power Units

  1. Find the rating you need to translate and note both its value and its unit.
  2. Enter the value in the converter and select the unit it is expressed in.
  3. Read the equivalents in the units you need.
  4. Check the magnitude makes sense: kilowatts to horsepower grows the number by about a third, watts to BTU per hour roughly triples it.
  5. Use the converted figure for your comparison, specification or purchase decision.

Worked Example: One Heater, Three Languages

A portable space heater is rated at 1,500 W. In kilowatts that is 1,500 ÷ 1,000 = 1.5 kW. In horsepower, using 745.7 W per horsepower, it is 1,500 ÷ 745.7 ≈ 2.01 hp — a reminder that even a modest heater matches a small engine's output. In the units a North American heating catalogue would use, it is 1,500 × 3.412 ≈ 5,118 BTU/h. All three descriptions are the same heater doing the same work; only the dialect changed. This is why a 5,000 BTU/h air conditioner and a 1,465-watt one can be the identical machine wearing different labels for different markets.

The Confusion That Causes Real Errors: Power Versus Energy

The most expensive misunderstanding in this area is mixing up power and energy. Kilowatts measure power — how fast energy is used. Kilowatt-hours measure energy — how much was used in total. A 2 kW heater running for three hours consumes 6 kWh, and your electricity bill is calculated on the kilowatt-hours. Converting watts to horsepower says nothing about running costs until time enters the picture; running costs belong with the electricity cost calculator.

Ratings also hide in fractions. Motor nameplates in North America routinely describe fractional horsepower — a three-quarter horsepower sump pump, a half-horsepower garage-door opener. Converting 0.75 hp gives about 559 W of mechanical power, which is why the same pump's electrical specification sits in that neighbourhood before efficiency is considered. Fluency with these fractional ratings is half the battle when matching a replacement motor to existing equipment: the physical mounting may match perfectly while a careless unit reading leaves you a quarter-horsepower short.

A second trap is nameplate optimism. A motor's rated power may describe its electrical input or its mechanical output, and the two differ by the motor's efficiency — a 1 kW-input motor might deliver 800 W of shaft power. Converters translate units faithfully, but only the specification sheet can tell you which quantity the manufacturer was describing.

Frequently Asked Questions

How many watts are in one horsepower?

One mechanical horsepower equals approximately 745.7 watts. Metric horsepower (PS) is slightly smaller at about 735.5 watts, so check which definition a specification uses if the difference matters.

How do I convert kilowatts to horsepower?

Multiply the kilowatts by about 1.341. So a 100 kW electric car motor produces roughly 134 hp — the same motor, described for a different audience.

What is the difference between kW and kWh?

Kilowatts measure power, the rate of energy use at a moment. Kilowatt-hours measure total energy used over time. Appliances are rated in kW; electricity bills are charged in kWh.

Why are air conditioners rated in BTU per hour?

BTU per hour measures how much heat the unit can move per hour, which is exactly what buyers need to know. Roughly 3.412 BTU/h equals one watt, so a 12,000 BTU/h unit is about a 3.5 kW machine in electrical terms of heat moved.

Does a higher wattage always mean a better appliance?

No. Wattage tells you the rate of energy use, not efficiency or quality. A well-designed 1,000 W heater and a poor 1,500 W one may warm a room similarly, with the smaller unit costing less to run.

Can I convert the power of a car engine in both directions?

Yes. Enter horsepower to get kilowatts for comparing with electric vehicles, or kilowatts to get horsepower for comparing with petrol and diesel engines. A voltage converter covers the neighbouring electrical unit conversions.

Specifications Make Sense When the Units Agree

Manufacturers will keep describing the same power in whatever unit their market prefers. A reliable conversion lets you compare a heater, a motor and an engine on one scale — and spot the machine that actually fits the job.