Toolsky

Free Online Tools & Utilities for Every Task.

Morse Code Converter

Easily encode text into Morse code or decode Morse code back into plain, readable text.

Long before text messages, operators tapped out messages as short and long signals, and the system they used still turns up in radio, aviation and puzzle hunts today. This Morse code converter translates ordinary text into dots and dashes, and just as easily decodes a string of Morse back into readable words, so you never have to memorise the whole alphabet to work with it.

How Morse Code Works

Morse assigns every letter and digit a unique pattern of short signals (dots) and long signals (dashes). Frequent letters get the shortest patterns — E is a single dot, T a single dash — while rarer letters such as Q (– – · –) take longer. Numbers run in a tidy sequence from one to five dots or dashes, and punctuation has its own set of patterns. Words stay readable because a slightly longer gap separates letters, and an even longer gap separates words; in written Morse those gaps are usually shown with spaces and a slash between words.

The code was built for telegraph wires in the nineteenth century and later became the backbone of early radio. Today it survives in amateur radio call signs, navigation beacons that still flash their identifiers, accessibility switches for people who cannot use a keyboard, and a steady stream of escape-room and game puzzles.

What This Converter Does

  • Encodes plain text into standard international Morse for letters, digits and common punctuation
  • Decodes dotted and dashed input back into plain text, tolerating the usual spacing styles
  • Keeps word boundaries clear by marking the gap between words
  • Handles mixed content, so a sentence with numbers and punctuation converts in one pass
  • Lets you copy the result cleanly for pasting into documents, chats or puzzle answers

If your work also involves other text encodings, the text to binary converter covers the machine-side equivalent, and the binary to text tool decodes it back.

How to Encode or Decode a Message

  1. Type or paste your plain text into the input box if you want to encode, or paste a Morse sequence if you want to decode.
  2. Choose the direction of the conversion.
  3. Run the conversion and read the result in the output area.
  4. Check the letter spacing in decoded output, since mis-spaced Morse is the most common source of errors.
  5. Copy the finished text or code wherever you need it.

A Worked Example: The Most Famous Signal in Morse

The distress call SOS encodes as · · · – – – · · ·. It was chosen historically because the pattern is unmistakable, not because the letters mean anything. A friendlier example: the word HELLO becomes · · · · (H), · (E), · – · · (L), · – · · (L), – – – (O). Notice how each letter's pattern is separated by a space, which is exactly the spacing the decoder relies on when turning the signals back into words.

Tips, Limitations and Common Mistakes

Spacing is everything. A single space between letters and a wider gap (or slash) between words is the convention; mash the patterns together and even a perfect decoder can only guess where one letter ends and the next begins. Another common slip is mixing up similar patterns — S (· · ·) and H (· · · ·) differ by one dot, and B (– · · ·) mirrors D (– · ·) closely enough to trip beginners.

Know the limits, too. Morse has no native way to write accented characters or most symbols, so text containing them may be simplified or dropped during encoding. The converter translates the written form of the code; it does not play audio or flash lights, and timing rules used on real radio (where a dash lasts three dots) apply to transmission, not to the text you see here. Finally, regional variants exist for a few characters, so if a decoded letter looks wrong, check whether the sender used a national extension.

Morse also has a small vocabulary of procedural signals, called prosigns, that operators send as single units: AR marks the end of a message, SK signals the end of a contact, and the famous SOS runs its three letters together without gaps for instant recognition. Written exercises and decoders vary in whether they show these joined patterns, so if a decoded passage contains an odd cluster of letters, check whether the sender was using a prosign rather than ordinary spaced letters.

Frequently Asked Questions About the Morse Code Converter

Is Morse code still used anywhere today?

Yes. Amateur radio operators use it daily, some aviation and maritime beacons still identify themselves in Morse, and it appears in accessibility technology and games.

What do the slash and spaces mean in written Morse?

A single space separates letters within a word, and a slash (or a wider gap) separates words. Without those gaps the code becomes ambiguous.

Can the converter decode Morse I copied from a website?

Usually, yes, as long as the dots and dashes use standard characters and the letter spacing survived the copy. If the result looks garbled, the spacing is the first thing to fix.

Does Morse code have lowercase letters?

No. Morse has one pattern per letter regardless of case, so decoded output is normally shown in uppercase or plain lowercase text.

How are numbers written in Morse?

Each digit has a five-signal pattern: 1 is · – – – –, 5 is · · · · · and 0 is – – – – –, following a regular counting pattern.

Why is SOS written as three dots, three dashes, three dots?

The pattern is symmetrical and impossible to mistake for anything else, which made it ideal as a distress signal when it was adopted in the early 1900s.

Can Morse represent punctuation?

Common marks such as the full stop, comma, question mark and apostrophe all have standard patterns, and this converter supports the usual set.

Old Signals, Instant Translation

You may never need to tap out a message on a key, but when a string of dots and dashes crosses your path — in a puzzle, a broadcast or a history book — this converter turns it back into plain language in seconds, and turns your own words into code just as fast.